Forging hammer Kramatorsk 17KP 5 ton

• Condition

• Good Working.

• Technical Specifications

• Nominal weight of dropping parts	5000 kg
  Actual mass of dropping parts without the Upper tool	5080 kg
  Effective kinetic energy of dropping parts at Full consecutive blows	125 kJ
  Number of strikes per min	50
  Max course of the hammer block	1300 mm
  Min height of tools without shanks	400 mm
  Distance between columns	800 mm
  Length of the hammer block (at direction, Perpendicular to hammer front)	950 mm
  Length of the die holder (at direction, Perpendicular to hammer front)	1180 mm
  Weight	139 ton

• Additional Information

• Forging hammer Kramatorsk 17KP are used in the drop forging to form the metal between two dies. The first half of the die is attached to the anvil and the second part to the hammer. The material is placed in the lower die and then hammered with the upper one until the hot metal flows in all directions, filling the die cavity. Drop forging is the first industrial process which had been developed for closed die forging, before the introduction of presses.